Civil Projects

Our team removed the damaged bitumen, repaired the foundation, and resurfaced the area for lasting durability. Precise line markings were added to improve traffic flow and safety, providing a fully restored, functional carpark.

The Bundoora Park Amphitheatre was refurbished to address safety concerns, especially for children, and enhance the park's aesthetics. Using natural mudstone, the new design met the client’s vision while ensuring safety. 

The project replaces the bridge with a precast concrete structure and upgrades safety features like fencing, railings, and barricades, while carefully preserving the operational aqueduct’s functionality and structure during construction.

The Huntingdale Wetland project focused on reactivating the spillway to reduce flood risk, streamlining operations for enhanced safety. A new pedestrian walkway was also built, providing a safer, more accessible route in all weather conditions.

Sludge was carefully removed from the inlet pipe and around the outlet pumps using a custom-designed squeegee to avoid damaging the clay base. The basins were thoroughly cleaned and recycled water quality was maintained.

A safer access solution to the Grouting Gallery was required, prioritising safety and risk reduction. The ladder system was replaced with a staircase, reclassifying the entry to meet Restricted Space standards, camouflaging the access point to prevent vandalism.

The creation of a safe, heavy-duty platform for the operations team to enter and exit their service boat. The design included a submerged platform with a steel structure protected by specialised water-resistant coatings. 

The client’s venting system had deteriorated from H2S gases, with risers at risk of failure. Vent stacks were replaced with fiberglass or stainless steel, depending on location. Legacy issues with encroaching services required tailored solutions for safety.

This project involved replacing two pumps in a sanitary pit with new macerator-equipped units. Works included installing guide rails, NDT testing, recoating pipework, removing internal macerators, reconfiguring piping, and replacing damaged concrete pit lids.

New Cathodic Protection tags were welded to live sewer branches, with works requiring Confined Space access. Non-Destructive Digging was used to expose concrete pits for installing conduits from protection points to above-ground hook-up locations.